888.980.6575

                        Easy Online Ordering and Same Day Shipping.

Search Site

Search results for '51'

17 Item(s)

per page

Set Ascending Direction
  1. XHD Canvas Stretchers

    Xtra Heavy Duty Kits- 2-1/4" Deep x 1-3/8" wide, up to 24"x30"

    Starting at: $14.99

    KITS AVAILABLE UP TO 24"X30" Our Xtra Heavy Duty stretcher bar kits provide a 2-1/4" deep profile. All kits come with stretcher bars, corner braces, corner clips, screws and a wall hanging kit. Everything you need for a successful canvas stretching experience. All stretcher bars are made from kiln dried North American Poplar hardwood. 1 Kit in each box.

    Learn More
  2. XHD 45º Back Braces - 1¾” wide - 4 braces

    XHD 45º Back Braces - 1¾” wide - 4 braces

    Starting at: $45.51

    How to order the correct size: Multiply the short side of your frame by 0.6. Example (40"x60") 40x0.6=24", if your math results in a decimal point round up or down to the nearest inch.

    45º Back Braces - 1¾” wide - 4 braces - 45 degree back braces are used in a “diamond configuration” to support the sides of the stretcher bars. If you purchase 45 degree braces, you will not usually need a center back brace unless the stretched canvas is over 60” and the short side of the canvas is less than 38”.

    Learn More
  3. XHD Back Brace - 1¾” wide - 1 center brace, *For use with XHD bars only

    XHD Back Brace - 1¾” wide - 1 center brace, *For use with XHD bars only

    Starting at: $11.28

    These back braces are intended for use with stretcher bar kits over 30"-34” on the long side. Order the same length as the 'short' side of your stretcher bar kit(s).

    For most applications only one back brace required per stretcher bar kit . For longer, panorama style frames, two or more back braces may be required.

    For stretcher bar kits with both dimensions exceeding 30", see our 45 Degree Back Braces.

    Note: It is not necessary to order backbraces when ordering a pre-configured kit.

    Learn More
  4. XHD Stretcher Bars- 2-1/4" Depth, Up to 200"- 2 Pak

    XHD Stretcher Bars- 2-1/4" Depth, Up to 200"- 2 Pak

    Starting at: $21.01

     

    • STRETCH UP TO 200"+ With These XTRA Heavy Duty Bars!!
    • These stretcher bars are 2-1/4” inch deep to the wall, 1⅜” wide and up to 200” long.
    • Designed to support the largest gallery wraps
    • Made from kiln dried North American Poplar hardwood.
    • Sold in "2 Paks"
    • Wraptek Solid Wood Stretcher Bars Are Made 100% in the USA.
    • 2 Grooves to accept double bracing
    • Splice kits included with bars over 100"
    Learn More
  5. Medium Duty Back Brace - 1¾” wide - 1 center brace, *For use with medium duty bars ONLY

    Medium Duty Back Brace - 1¾” wide - 1 center brace, *For use with medium duty bars ONLY

    Starting at: $2.52

    These back braces are intended for use with stretcher bar kits over 30"-34” on the long side. Order the same length as the 'short' side of your stretcher bar kit(s).

    For most applications only one back brace required per stretcher bar kit . For longer, panorama style frames, two or more back braces may be required.

    For stretcher bar kits with both dimensions exceeding 30", see our 45 Degree Back Braces.

    Note: It is not necessary to order backbraces when ordering a pre-configured kit.

    Note that Medium Duty braces are longer than Standard braces and are not interchangable.

    Learn More
  6. Sawtooth Hangers 25 pack

    Sawtooth Hangers 25 pack

    $2.88

    Sawtooth Hangers (25 Pack) are 5/16" x 2"- Zinc Easy install these hangers into Wraptek stretcher bars with a tap of a hammer. Save 20% when you buy 4 or more. Learn More
  7. Medium Duty Stretcher Bars - 1-1/2" Depth, Up to 60"- 8 Bar Pack

    Medium Duty Stretcher Bars - 1-1/2" Depth, Up to 60"- 8 Bar Pack

    Starting at: $21.86

    • OUR MOST ECONOMICAL WAY TO STRETCH UP TO 60" PRINTS!
    • These stretcher bars are 1-1/2” deep to the wall, 1” wide and up to 60” long.
    • Designed to support gallery wraps
    • Made from kiln dried North American Poplar hardwood.
    • Sold in "8 Paks"
    • WrapTek Solid Wood Stretcher Bars Are Made 100% in the USA.
    Learn More
  8. Medium Duty Stretcher Bars- 1-1/2" Depth, Up to 60"- 2 Bar Pack

    Medium Duty Stretcher Bars- 1-1/2" Depth, Up to 60"- 2 Bar Pack

    Starting at: $6.07

    • OUR MOST ECONOMICAL WAY TO STRETCH UP TO 60" PRINTS!
    • These stretcher bars are 1-1/2” deep to the wall, 1” wide and up to 60” long.
    • Designed to support gallery wraps
    • Made from kiln dried North American Poplar hardwood.
    • Sold in "2 Paks"
    • WrapTek Solid Wood Stretcher Bars Are Made 100% in the USA.
    Learn More
  9. Medium Duty Kits- 1-1/2" Depth x 1" Wide, Up to 40"x60"

    Medium Duty Kits- 1-1/2" Depth x 1" Wide, Up to 40"x60"

    Starting at: $24.88

    Our most economical way to stretch up to 60" prints!

    Our WrapTek medium duty canvas stretcher frames provide a 1½" deep profile. All canvas frame kit come with stretcher bars, corner braces, corner clips, screws and a wall hanging kit. Everything you need for a successful canvas stretching experience. All stretcher bars are made from kiln dried North American Poplar hardwood. 1 Kit in each box.

    * = Kit includes required center brace
    **= Kit includes required 45 degree backbraces

    Learn More
  10. Museum Depth Stretcher Bars - 1-1/4" Depth, Up to 72"- 8 Bar Pack

    Museum Depth Stretcher Bars - 1-1/4" Depth, Up to 72"- 8 Bar Pack

    Starting at: $23.55

    • STRETCH UP TO 72" WITH THESE LOW PROFILE BARS!
    • These stretcher bars are 1¼” deep to the wall, 1⅜” wide and up to 72” long.
    • Designed to support gallery wraps
    • Made from kiln dried North American Poplar hardwood.
    • Stretcher Bars over 54” WILL incur a special shipping charge from UPS.
    • Sold in "8 Paks"
    • WrapTek Solid Wood Stretcher Bars Are Made 100% in the USA.
    Learn More
  11. Standard Duty Stretcher Bars- 1-1/2" Depth, Up to 90"- 8 Bar Pack

    Standard Duty Stretcher Bars- 1-1/2" Depth, Up to 90"- 8 Bar Pack

    Starting at: $23.55

    • STRETCH UP TO 90" WITH OUR MOST POPULAR STYLE BARS!
    • These stretcher bars are 1½” deep to the wall, 1⅜” wide and up to 90” long.
    • Designed to support gallery wraps
    • Made from kiln dried North American Poplar hardwood.
    • Stretcher Bars over 54” WILL incur a special shipping charge from UPS.
    • Sold in "8 Paks"
    • WrapTek Solid Wood Stretcher Bars Are Made 100% in the USA.
    Learn More
  12. Heavy Duty Stretcher Bars- 1-3/4" Depth, Up to 100"- 8 Bar Pack

    Heavy Duty Stretcher Bars- 1-3/4" Depth, Up to 100"- 8 Bar Pack

    Starting at: $27.23

    • STRETCH UP TO 100" WITH OUR HEAVY DUTY BARS!
    • These stretcher bars are 1¾” deep to the wall, 1⅜” wide and up to 100” long.
    • Designed to support gallery wraps
    • Made from kiln dried North American Poplar hardwood.
    • Stretcher Bars over 54” WILL incur a special shipping charge from UPS.
    • Sold in "8 Paks"
    • WrapTek Solid Wood Stretcher Bars Are Made 100% in the USA.
    Learn More
  13. Heavy Duty Stretcher Bars- 1-3/4" Depth, Up to 100"- 2 Bar Pack

    Heavy Duty Stretcher Bars- 1-3/4" Depth, Up to 100"- 2 Bar Pack

    Starting at: $7.36

     

    • STRETCH UP TO 100" WITH THESE HEAVY DUTY BARS!!
    • These stretcher bars are 1¾” inch deep to the wall, 1⅜” wide and up to 100” long.
    • Designed to support gallery wraps
    • Made from kiln dried North American Poplar hardwood.
    • Sold in "2 Paks"
    • WrapTek Solid Wood Stretcher Bars Are Made 100% in the USA.
    Learn More
  14. Standard Duty Stretcher Bars- 1-1/2" Depth, Up to 90"- 2 Bar Pack

    Standard Duty Stretcher Bars- 1-1/2" Depth, Up to 90"- 2 Bar Pack

    Starting at: $6.44

    • STRETCH UP TO 90" WITH OUR MOST POPULAR STYLE BARS!
    • These stretcher bars are 1½” deep to the wall, 1⅜” wide and up to 90” long.
    • Designed to support gallery wraps
    • Made from kiln dried North American Poplar hardwood.
    • Stretcher Bars over 54” WILL incur a special shipping charge from UPS.
    • Sold in "2 Paks"
    • WrapTek Solid Wood Stretcher Bars Are Made 100% in the USA.
    Learn More
  15. Museum Depth Stretcher Bars- 1-1/4" Depth, Up to 72"- 2 Bar Pack

    Museum Depth Stretcher Bars- 1-1/4" Depth, Up to 72"- 2 Bar Pack

    Starting at: $6.44

    • STRETCH UP TO 72" WITH THESE BARS!
    • These stretcher bars are 1¼” deep to the wall, 1⅜” wide and up to 72” long.
    • Designed to support gallery wraps
    • Made from kiln dried North American Poplar hardwood.
    • Stretcher Bars over 54” WILL incur a special shipping charge from UPS.
    • Sold in "2 Paks"
    • WrapTek Solid Wood Stretcher Bars Are Made 100% in the USA.
    Learn More
  16. Heavy Duty Kits- 1-3/4" Deep x 1-3/8" wide, up to 40"x60"

    Heavy Duty Kits- 1-3/4" Deep x 1-3/8" wide, up to 40"x60"

    Starting at: $36.05

    KITS AVAILABLE UP TO 40"X60"!Our Heavy Duty stretcher bar kits provide a 1¾" deep profile. All kits come with stretcher bars, corner braces, corner clips, screws and a wall hanging kit. Everything you need for a successful canvas stretching experience. All stretcher bars are made from kiln dried North American Poplar hardwood. 1 Kit in each box.

    Learn More
  17. Standard Back Brace - 1¾” wide - 1 center brace, *Not for use with medium duty bars

    Standard Back Brace - 1¾” wide - 1 center brace, *Not for use with medium duty bars

    Starting at: $2.52

    These back braces are intended for use with stretcher bar kits over 30"-34” on the long side. Order the same length as the 'short' side of your stretcher bar kit(s).

    For most applications only one back brace required per stretcher bar kit . For longer, panorama style frames, two or more back braces may be required.

    For stretcher bar kits with both dimensions exceeding 30", see our 45 Degree Back Braces.

    Note: It is not necessary to order backbraces when ordering a pre-configured kit.

    Learn More

17 Item(s)

per page

Set Ascending Direction

Back to top