888.980.6575

Search Site

Heavy Duty (1-3/4")

Kits:

KITS AVAILABLE UP TO 40"X60"! Our Heavy Duty stretcher bar kits provide a 1¾" deep profile. All kits come with stretcher bars, corner braces, corner clips, screws and a wall hanging kit. Everything you need for a successful canvas stretching experience. All stretcher bars are made from kiln dried North American Poplar hardwood. 1 Kit in each box.

2 Paks, 8 Paks and 24 Paks:

Each "Pak" of Wraptek stretcher bars contains 2, 8 or 24 bars plus one corner clip and corner brace per stretcher bar. We also include 2 screws per bar and two sawtooth hangers per each 4 bar allowing for two hanging points per stretched canvas frame.

Center Braces:

Center braces are intended for use with stretcher bar kits over 30"-34” on the long side. Order the same length as the 'short' side of your stretcher bar kit(s).
For most applications only one back brace required per stretcher bar kit . For longer, panorama style frames, two or more back braces may be required.

45 Degree Braces:

How to order the correct size: Multiply the short side of your frame by 0.6. Example (40"x60") 40x0.6=24", if your math results in a decimal point round up or down to the nearest inch.

45º Back Braces - 1¾” wide - 4 braces - 45 degree back braces are used in a “diamond configuration” to support the sides of the stretcher bars. If you purchase 45 degree braces, you will not usually need a center back brace unless the stretched canvas is over 60” and the short side of the canvas is less than 38”.

There are no products matching the selection.

Back to top