Search results for '17" back brace'

KITS AVAILABLE UP TO 24"X30" Our Xtra Heavy Duty stretcher bar kits provide a 2-1/4" deep profile. All kits come with stretcher bars, corner braces, corner clips, screws and a wall hanging kit. Everything you need for a successful canvas stretching experience. All stretcher bars are made from kiln dried North American Poplar hardwood. 1 Kit in each box.

Learn More

How to order the correct size: Multiply the short side of your frame by 0.6. Example (40"x60") 40x0.6=24", if your math results in a decimal point round up or down to the nearest inch.

45º Back Braces - 1¾” wide - 4 braces - 45 degree back braces are used in a “diamond configuration” to support the sides of the stretcher bars. If you purchase 45 degree braces, you will not usually need a center back brace unless the stretched canvas is over 60” and the short side of the canvas is less than 38”.

Learn More

These back braces are intended for use with stretcher bar kits over 30"-34” on the long side. Order the same length as the 'short' side of your stretcher bar kit(s).

For most applications only one back brace required per stretcher bar kit . For longer, panorama style frames, two or more back braces may be required.

For stretcher bar kits with both dimensions exceeding 30", see our 45 Degree Back Braces.

Note: It is not necessary to order backbraces when ordering a pre-configured kit.

Learn More

 

• STRETCH UP TO 200"+ With These XTRA Heavy Duty Bars!!
• These stretcher bars are 2-1/4” inch deep to the wall, 1⅜” wide and up to 200” long.
• Designed to support the largest gallery wraps
• Made from kiln dried North American Poplar hardwood.
• Sold in "2 Paks"
• Wraptek Solid Wood Stretcher Bars Are Made 100% in the USA.
• 2 Grooves to accept double bracing
• Splice kits included with bars over 100"

Learn More

Aqueos, Latex, UV, 13mil, 100' Rolls

Benefits:
- Water Resistant
- 600 x 600 Denier
- Scratch Resistant
- Ultra Strong
- Recyclable

Applications:
- Roll-up Banners
- Hanging Banners or Wall Drape
- Theater Backdrops
- Faux Canvas

Spec Sheet

Printer Settings

Aqueous Media Application Guide

Learn More

Solvent, Eco Solvent, Latex, UV, 21mil, 65' Rolls

Benefits:
- Gallery Frame Wrap
- Crack Free Stretching when Laminated
- Full Color Gamut Representation with Vivid Color Locking
- Smooth Matte Finish
- Water Resistant
- 24", 36", 54" & 60" rolls

Applications:
- Great for Indoor Gallery Wrap
- Backdrops & Signage
- Photo Reproduction

Spec Sheet

Printer Settings

Aqueous Media Application Guide

Learn More

These back braces are intended for use with stretcher bar kits over 30"-34” on the long side. Order the same length as the 'short' side of your stretcher bar kit(s).

For most applications only one back brace required per stretcher bar kit . For longer, panorama style frames, two or more back braces may be required.

For stretcher bar kits with both dimensions exceeding 30", see our 45 Degree Back Braces.

Note: It is not necessary to order backbraces when ordering a pre-configured kit.

Note that Medium Duty braces are longer than Standard braces and are not interchangable.

Learn More

Our standard corner braces, supplied 1 per bar ordered. In case you misplaced your corners you can buy more here for $1.99 for a set of 4 corners. 4 Corner braces are enough to stretch one print onto a set of our Wraptek stretcher bars. Buy 4 sets and save 20% Learn More

Includes 2 heavy duty frame hangers for the back of the canvas, 2 wall brackets w/nails, and over 100” of braided wire. Learn More

• OUR MOST ECONOMICAL WAY TO STRETCH UP TO 48" PRINTS!
• These stretcher bars are 1-1/2” deep to the wall, 1” wide and up to 48” long.
• Designed to support gallery wraps
• Made from kiln dried North American Poplar hardwood.
• Sold in "24 Bar Cases"
• WrapTek Stretcher Bars are Made 100% in the USA.

Learn More

• OUR MOST ECONOMICAL WAY TO STRETCH UP TO 60" PRINTS!
• These stretcher bars are 1-1/2” deep to the wall, 1” wide and up to 60” long.
• Designed to support gallery wraps
• Made from kiln dried North American Poplar hardwood.
• Sold in "8 Paks"
• WrapTek Solid Wood Stretcher Bars Are Made 100% in the USA.

Learn More

• OUR MOST ECONOMICAL WAY TO STRETCH UP TO 60" PRINTS!
• These stretcher bars are 1-1/2” deep to the wall, 1” wide and up to 60” long.
• Designed to support gallery wraps
• Made from kiln dried North American Poplar hardwood.
• Sold in "2 Paks"
• WrapTek Solid Wood Stretcher Bars Are Made 100% in the USA.

Learn More

Our most economical way to stretch up to 60" prints!

Our WrapTek medium duty canvas stretcher frames provide a 1½" deep profile. All canvas frame kit come with stretcher bars, corner braces, corner clips, screws and a wall hanging kit. Everything you need for a successful canvas stretching experience. All stretcher bars are made from kiln dried North American Poplar hardwood. 1 Kit in each box.

* = Kit includes required center brace
**= Kit includes required 45 degree backbraces

Learn More

• STRETCH UP TO 72" WITH THESE LOW PROFILE BARS!
• These stretcher bars are 1¼” deep to the wall, 1⅜” wide and up to 72” long.
• Designed to support gallery wraps
• Made from kiln dried North American Poplar hardwood.
• Stretcher Bars over 54” WILL incur a special shipping charge from UPS.
• Sold in "8 Paks"
• WrapTek Solid Wood Stretcher Bars Are Made 100% in the USA.

Learn More

• STRETCH UP TO 90" WITH OUR MOST POPULAR STYLE BARS!
• These stretcher bars are 1½” deep to the wall, 1⅜” wide and up to 90” long.
• Designed to support gallery wraps
• Made from kiln dried North American Poplar hardwood.
• Stretcher Bars over 54” WILL incur a special shipping charge from UPS.
• Sold in "8 Paks"
• WrapTek Solid Wood Stretcher Bars Are Made 100% in the USA.

Learn More

• STRETCH UP TO 100" WITH OUR HEAVY DUTY BARS!
• These stretcher bars are 1¾” deep to the wall, 1⅜” wide and up to 100” long.
• Designed to support gallery wraps
• Made from kiln dried North American Poplar hardwood.
• Stretcher Bars over 54” WILL incur a special shipping charge from UPS.
• Sold in "8 Paks"
• WrapTek Solid Wood Stretcher Bars Are Made 100% in the USA.

Learn More

 

• STRETCH UP TO 100" WITH THESE HEAVY DUTY BARS!!
• These stretcher bars are 1¾” inch deep to the wall, 1⅜” wide and up to 100” long.
• Designed to support gallery wraps
• Made from kiln dried North American Poplar hardwood.
• Sold in "2 Paks"
• WrapTek Solid Wood Stretcher Bars Are Made 100% in the USA.

Learn More

• STRETCH UP TO 90" WITH OUR MOST POPULAR STYLE BARS!
• These stretcher bars are 1½” deep to the wall, 1⅜” wide and up to 90” long.
• Designed to support gallery wraps
• Made from kiln dried North American Poplar hardwood.
• Stretcher Bars over 54” WILL incur a special shipping charge from UPS.
• Sold in "2 Paks"
• WrapTek Solid Wood Stretcher Bars Are Made 100% in the USA.

Learn More

• STRETCH UP TO 72" WITH THESE BARS!
• These stretcher bars are 1¼” deep to the wall, 1⅜” wide and up to 72” long.
• Designed to support gallery wraps
• Made from kiln dried North American Poplar hardwood.
• Stretcher Bars over 54” WILL incur a special shipping charge from UPS.
• Sold in "2 Paks"
• WrapTek Solid Wood Stretcher Bars Are Made 100% in the USA.

Learn More

KITS AVAILABLE UP TO 40"X60"!Our Heavy Duty stretcher bar kits provide a 1¾" deep profile. All kits come with stretcher bars, corner braces, corner clips, screws and a wall hanging kit. Everything you need for a successful canvas stretching experience. All stretcher bars are made from kiln dried North American Poplar hardwood. 1 Kit in each box.

Learn More

How to order the correct size: Multiply the short side of your frame by 0.6. Example (40"x60") 40x0.6=24", if your math results in a decimal point round up or down to the nearest inch.

45º Back Braces - 1¾” wide - 4 braces - 45 degree back braces are used in a “diamond configuration” to support the sides of the stretcher bars. If you purchase 45 degree braces, you will not usually need a center back brace unless the stretched canvas is over 60” and the short side of the canvas is less than 38”.

Learn More

These back braces are intended for use with stretcher bar kits over 30"-34” on the long side. Order the same length as the 'short' side of your stretcher bar kit(s).

For most applications only one back brace required per stretcher bar kit . For longer, panorama style frames, two or more back braces may be required.

For stretcher bar kits with both dimensions exceeding 30", see our 45 Degree Back Braces.

Note: It is not necessary to order backbraces when ordering a pre-configured kit.

Learn More

Our WrapTek standard duty stretcher bar kits provide a 1½" deep profile. All kits come with stretcher bars, corner braces, corner clips, screws and a wall hanging kit. Everything you need for a successful canvas stretching experience. All stretcher bars are made from kiln dried North American Poplar hardwood. 1 Kit in each box.

* = Kit includes required center brace
**= Kit includes required 45 degree backbraces

Learn More

Our WrapTek museum depth canvas stretcher bar kits provide a 1¼" deep profile. All stretcher bar kits come with stretcher bar frames, corner braces, corner clips, screws and a wall hanging kit. Everything you need for a successful canvas stretching experience. All stretcher bars are made from kiln dried North American Poplar hardwood. 1 Kit in each box.

* = Kit includes required center brace
**= Kit includes required 45 degree backbraces 

Learn More