Search results for '76 inch'

Print on 21mil Archival Poly-Cotton Matte Artistic Canvas Print

Wraptek Stretcher Bars and hangers INCLUDED!

Print and stretcher bars come in one box with easy to assembly instructions.

Print on 21mil Archival Poly-Cotton Matte Artistic Canvas Print

Wraptek Stretcher Bars and hangers INCLUDED!

Print and stretcher bars come in one box with easy to assembly instructions.

Print on 21mil Archival Poly-Cotton Matte Artistic Canvas Print

Wraptek Stretcher Bars and hangers INCLUDED!

Print and stretcher bars come in one box with easy to assembly instructions.

Print on 21mil Archival Poly-Cotton Matte Artistic Canvas Print

Wraptek Stretcher Bars and hangers INCLUDED!

Print and stretcher bars come in one box with easy to assembly instructions.

Print on 21mil Archival Poly-Cotton Matte Artistic Canvas Print

Wraptek Stretcher Bars and hangers INCLUDED!

Print and stretcher bars come in one box with easy to assembly instructions.

Print on 21mil Archival Poly-Cotton Matte Artistic Canvas Print

Wraptek Stretcher Bars and hangers INCLUDED!

Print and stretcher bars come in one box with easy to assembly instructions.

How to order the correct size: Multiply the short side of your frame by 0.6. Example (40"x60") 40x0.6=24", if your math results in a decimal point round up or down to the nearest inch.

45º Back Braces - 1¾” wide - 4 braces - 45 degree back braces are used in a “diamond configuration” to support the sides of the stretcher bars. If you purchase 45 degree braces, you will not usually need a center back brace unless the stretched canvas is over 60” and the short side of the canvas is less than 38”.

These back braces are intended for use with stretcher bar kits over 30"-34” on the long side. Order the same length as the 'short' side of your stretcher bar kit(s).

For most applications only one back brace required per stretcher bar kit . For longer, panorama style frames, two or more back braces may be required.

For stretcher bar kits with both dimensions exceeding 30", see our 45 Degree Back Braces.

Note: It is not necessary to order backbraces when ordering a pre-configured kit.

• STRETCH UP TO 200"+ With These XTRA Heavy Duty Bars!!
• These stretcher bars are 2-1/4” inch deep to the wall, 1⅜” wide and up to 200” long.
• Designed to support the largest gallery wraps
• Made from kiln dried North American Poplar hardwood.
• Sold in "2 Paks"
• Wraptek Solid Wood Stretcher Bars Are Made 100% in the USA.
• 2 Grooves to accept double bracing
• Splice kits included with bars over 100"

These back braces are intended for use with stretcher bar kits over 30"-34” on the long side. Order the same length as the 'short' side of your stretcher bar kit(s).

For most applications only one back brace required per stretcher bar kit . For longer, panorama style frames, two or more back braces may be required.

For stretcher bar kits with both dimensions exceeding 30", see our 45 Degree Back Braces.

Note: It is not necessary to order backbraces when ordering a pre-configured kit.

Note that Medium Duty braces are longer than Standard braces and are not interchangable.

• OUR MOST ECONOMICAL WAY TO STRETCH UP TO 60" PRINTS!
• These stretcher bars are 1-1/2” deep to the wall, 1” wide and up to 60” long.
• Designed to support gallery wraps
• Made from kiln dried North American Poplar hardwood.
• Sold in "8 Paks"
• WrapTek Solid Wood Stretcher Bars Are Made 100% in the USA.

• STRETCH UP TO 100" WITH OUR HEAVY DUTY BARS!
• These stretcher bars are 1¾” deep to the wall, 1⅜” wide and up to 100” long.
• Designed to support gallery wraps
• Made from kiln dried North American Poplar hardwood.
• Stretcher Bars over 54” WILL incur a special shipping charge from UPS.
• Sold in "8 Paks"
• WrapTek Solid Wood Stretcher Bars Are Made 100% in the USA.

• STRETCH UP TO 100" WITH THESE HEAVY DUTY BARS!!
• These stretcher bars are 1¾” inch deep to the wall, 1⅜” wide and up to 100” long.
• Designed to support gallery wraps
• Made from kiln dried North American Poplar hardwood.
• Sold in "2 Paks"
• WrapTek Solid Wood Stretcher Bars Are Made 100% in the USA.

• STRETCH UP TO 90" WITH OUR MOST POPULAR STYLE BARS!
• These stretcher bars are 1½” deep to the wall, 1⅜” wide and up to 90” long.
• Designed to support gallery wraps
• Made from kiln dried North American Poplar hardwood.
• Stretcher Bars over 54” WILL incur a special shipping charge from UPS.
• Sold in "2 Paks"
• WrapTek Solid Wood Stretcher Bars Are Made 100% in the USA.

How to order the correct size: Multiply the short side of your frame by 0.6. Example (40"x60") 40x0.6=24", if your math results in a decimal point round up or down to the nearest inch.

45º Back Braces - 1¾” wide - 4 braces - 45 degree back braces are used in a “diamond configuration” to support the sides of the stretcher bars. If you purchase 45 degree braces, you will not usually need a center back brace unless the stretched canvas is over 60” and the short side of the canvas is less than 38”.

These back braces are intended for use with stretcher bar kits over 30"-34” on the long side. Order the same length as the 'short' side of your stretcher bar kit(s).

For most applications only one back brace required per stretcher bar kit . For longer, panorama style frames, two or more back braces may be required.

For stretcher bar kits with both dimensions exceeding 30", see our 45 Degree Back Braces.

Note: It is not necessary to order backbraces when ordering a pre-configured kit.