Search results for 'corner brace'
23 Item(s)
-
Xtra Heavy Duty Kits- 2-1/4" Deep x 1-3/8" wide, up to 24"x30"
Starting at: $14.99
KITS AVAILABLE UP TO 24"X30" Our Xtra Heavy Duty stretcher bar kits provide a 2-1/4" deep profile. All kits come with stretcher bars, corner braces, corner clips, screws and a wall hanging kit. Everything you need for a successful canvas stretching experience. All stretcher bars are made from kiln dried North American Poplar hardwood. 1 Kit in each box.
Learn More -
XHD 45º Back Braces - 1¾” wide - 4 braces
Starting at: $45.51
How to order the correct size: Multiply the short side of your frame by 0.6. Example (40"x60") 40x0.6=24", if your math results in a decimal point round up or down to the nearest inch.
45º Back Braces - 1¾” wide - 4 braces - 45 degree back braces are used in a “diamond configuration” to support the sides of the stretcher bars. If you purchase 45 degree braces, you will not usually need a center back brace unless the stretched canvas is over 60” and the short side of the canvas is less than 38”.
Learn More -
XHD Back Brace - 1¾” wide - 1 center brace, *For use with XHD bars only
Starting at: $11.28
These back braces are intended for use with stretcher bar kits over 30"-34” on the long side. Order the same length as the 'short' side of your stretcher bar kit(s).
For most applications only one back brace required per stretcher bar kit . For longer, panorama style frames, two or more back braces may be required.
For stretcher bar kits with both dimensions exceeding 30", see our 45 Degree Back Braces.Note: It is not necessary to order backbraces when ordering a pre-configured kit.
Learn More -
XHD Stretcher Bars- 2-1/4" Depth, Up to 200"- 2 Pak
Starting at: $21.01
- STRETCH UP TO 200"+ With These XTRA Heavy Duty Bars!!
- These stretcher bars are 2-1/4” inch deep to the wall, 1⅜” wide and up to 200” long.
- Designed to support the largest gallery wraps
- Made from kiln dried North American Poplar hardwood.
- Sold in "2 Paks"
- Wraptek Solid Wood Stretcher Bars Are Made 100% in the USA.
- 2 Grooves to accept double bracing
- Splice kits included with bars over 100"
-
Medium Duty Back Brace - 1¾” wide - 1 center brace, *For use with medium duty bars ONLY
Starting at: $2.52
These back braces are intended for use with stretcher bar kits over 30"-34” on the long side. Order the same length as the 'short' side of your stretcher bar kit(s).
For most applications only one back brace required per stretcher bar kit . For longer, panorama style frames, two or more back braces may be required.
For stretcher bar kits with both dimensions exceeding 30", see our 45 Degree Back Braces.Note: It is not necessary to order backbraces when ordering a pre-configured kit.
Note that Medium Duty braces are longer than Standard braces and are not interchangable.
Learn More -
Corner Clips- 4 Pack
$0.69Corner clips are supplied (1) per Wraptek stretcher bar your order. If you happen to have misplaced you corner clips you can purchase them here for $0.60 for a set of 4. Buy 10 sets and save 10% Learn More -
Hardware kits
$1.15Hardware Kits are supplied 1 per 4 bars ordered. (4) Corner Clips, (2) Sawtooth Hangers and (8) 3/4" Screws If you happened to misplace your hardware kit you can purchase them for $1/ea Save 20% when you buy 10 or more. Learn More -
Corner Braces- 4 Pack
$2.29Our standard corner braces, supplied 1 per bar ordered. In case you misplaced your corners you can buy more here for $1.99 for a set of 4 corners. 4 Corner braces are enough to stretch one print onto a set of our Wraptek stretcher bars. Buy 4 sets and save 20% Learn More -
Medium Duty Strecter Bars- 1-1/2" Depth, Up to 60"- 24 Bar Case
Starting at: $55.86
- OUR MOST ECONOMICAL WAY TO STRETCH UP TO 48" PRINTS!
- These stretcher bars are 1-1/2” deep to the wall, 1” wide and up to 48” long.
- Designed to support gallery wraps
- Made from kiln dried North American Poplar hardwood.
- Sold in "24 Bar Cases"
- WrapTek Stretcher Bars are Made 100% in the USA.
-
Medium Duty Stretcher Bars - 1-1/2" Depth, Up to 60"- 8 Bar Pack
Starting at: $21.86
- OUR MOST ECONOMICAL WAY TO STRETCH UP TO 60" PRINTS!
- These stretcher bars are 1-1/2” deep to the wall, 1” wide and up to 60” long.
- Designed to support gallery wraps
- Made from kiln dried North American Poplar hardwood.
- Sold in "8 Paks"
- WrapTek Solid Wood Stretcher Bars Are Made 100% in the USA.
-
Medium Duty Stretcher Bars- 1-1/2" Depth, Up to 60"- 2 Bar Pack
Starting at: $6.07
- OUR MOST ECONOMICAL WAY TO STRETCH UP TO 60" PRINTS!
- These stretcher bars are 1-1/2” deep to the wall, 1” wide and up to 60” long.
- Designed to support gallery wraps
- Made from kiln dried North American Poplar hardwood.
- Sold in "2 Paks"
- WrapTek Solid Wood Stretcher Bars Are Made 100% in the USA.
-
Medium Duty Kits- 1-1/2" Depth x 1" Wide, Up to 40"x60"
Starting at: $24.88
Our most economical way to stretch up to 60" prints!
Our WrapTek medium duty canvas stretcher frames provide a 1½" deep profile. All canvas frame kit come with stretcher bars, corner braces, corner clips, screws and a wall hanging kit. Everything you need for a successful canvas stretching experience. All stretcher bars are made from kiln dried North American Poplar hardwood. 1 Kit in each box.
* = Kit includes required center brace
Learn More
**= Kit includes required 45 degree backbraces -
Museum Depth Stretcher Bars - 1-1/4" Depth, Up to 72"- 8 Bar Pack
Starting at: $23.55
- STRETCH UP TO 72" WITH THESE LOW PROFILE BARS!
- These stretcher bars are 1¼” deep to the wall, 1⅜” wide and up to 72” long.
- Designed to support gallery wraps
- Made from kiln dried North American Poplar hardwood.
- Stretcher Bars over 54” WILL incur a special shipping charge from UPS.
- Sold in "8 Paks"
- WrapTek Solid Wood Stretcher Bars Are Made 100% in the USA.
-
Standard Duty Stretcher Bars- 1-1/2" Depth, Up to 90"- 8 Bar Pack
Starting at: $23.55
- STRETCH UP TO 90" WITH OUR MOST POPULAR STYLE BARS!
- These stretcher bars are 1½” deep to the wall, 1⅜” wide and up to 90” long.
- Designed to support gallery wraps
- Made from kiln dried North American Poplar hardwood.
- Stretcher Bars over 54” WILL incur a special shipping charge from UPS.
- Sold in "8 Paks"
- WrapTek Solid Wood Stretcher Bars Are Made 100% in the USA.
-
Heavy Duty Stretcher Bars- 1-3/4" Depth, Up to 100"- 8 Bar Pack
Starting at: $27.23
- STRETCH UP TO 100" WITH OUR HEAVY DUTY BARS!
- These stretcher bars are 1¾” deep to the wall, 1⅜” wide and up to 100” long.
- Designed to support gallery wraps
- Made from kiln dried North American Poplar hardwood.
- Stretcher Bars over 54” WILL incur a special shipping charge from UPS.
- Sold in "8 Paks"
- WrapTek Solid Wood Stretcher Bars Are Made 100% in the USA.
-
Heavy Duty Stretcher Bars- 1-3/4" Depth, Up to 100"- 2 Bar Pack
Starting at: $7.36
- STRETCH UP TO 100" WITH THESE HEAVY DUTY BARS!!
- These stretcher bars are 1¾” inch deep to the wall, 1⅜” wide and up to 100” long.
- Designed to support gallery wraps
- Made from kiln dried North American Poplar hardwood.
- Sold in "2 Paks"
- WrapTek Solid Wood Stretcher Bars Are Made 100% in the USA.
-
Standard Duty Stretcher Bars- 1-1/2" Depth, Up to 90"- 2 Bar Pack
Starting at: $6.44
- STRETCH UP TO 90" WITH OUR MOST POPULAR STYLE BARS!
- These stretcher bars are 1½” deep to the wall, 1⅜” wide and up to 90” long.
- Designed to support gallery wraps
- Made from kiln dried North American Poplar hardwood.
- Stretcher Bars over 54” WILL incur a special shipping charge from UPS.
- Sold in "2 Paks"
- WrapTek Solid Wood Stretcher Bars Are Made 100% in the USA.
-
Museum Depth Stretcher Bars- 1-1/4" Depth, Up to 72"- 2 Bar Pack
Starting at: $6.44
- STRETCH UP TO 72" WITH THESE BARS!
- These stretcher bars are 1¼” deep to the wall, 1⅜” wide and up to 72” long.
- Designed to support gallery wraps
- Made from kiln dried North American Poplar hardwood.
- Stretcher Bars over 54” WILL incur a special shipping charge from UPS.
- Sold in "2 Paks"
- WrapTek Solid Wood Stretcher Bars Are Made 100% in the USA.
-
Heavy Duty Kits- 1-3/4" Deep x 1-3/8" wide, up to 40"x60"
Starting at: $36.05
KITS AVAILABLE UP TO 40"X60"!Our Heavy Duty stretcher bar kits provide a 1¾" deep profile. All kits come with stretcher bars, corner braces, corner clips, screws and a wall hanging kit. Everything you need for a successful canvas stretching experience. All stretcher bars are made from kiln dried North American Poplar hardwood. 1 Kit in each box.
Learn More -
45º Back Braces - 1¾” wide - 4 braces
Starting at: $11.74
How to order the correct size: Multiply the short side of your frame by 0.6. Example (40"x60") 40x0.6=24", if your math results in a decimal point round up or down to the nearest inch.
45º Back Braces - 1¾” wide - 4 braces - 45 degree back braces are used in a “diamond configuration” to support the sides of the stretcher bars. If you purchase 45 degree braces, you will not usually need a center back brace unless the stretched canvas is over 60” and the short side of the canvas is less than 38”.
Learn More -
Standard Back Brace - 1¾” wide - 1 center brace, *Not for use with medium duty bars
Starting at: $2.52
These back braces are intended for use with stretcher bar kits over 30"-34” on the long side. Order the same length as the 'short' side of your stretcher bar kit(s).
For most applications only one back brace required per stretcher bar kit . For longer, panorama style frames, two or more back braces may be required.
For stretcher bar kits with both dimensions exceeding 30", see our 45 Degree Back Braces.Note: It is not necessary to order backbraces when ordering a pre-configured kit.
Learn More -
Standard Duty Kits- 1-1/2" Deep x 1-3/8" wide, Up to 40"x60"
Starting at: $30.38
Our WrapTek standard duty stretcher bar kits provide a 1½" deep profile. All kits come with stretcher bars, corner braces, corner clips, screws and a wall hanging kit. Everything you need for a successful canvas stretching experience. All stretcher bars are made from kiln dried North American Poplar hardwood. 1 Kit in each box.
* = Kit includes required center brace
Learn More
**= Kit includes required 45 degree backbraces -
Museum Depth Kits- 1-1/4" Deep x 1-3/8" wide, Up to 36"x40"
Starting at: $27.52
Our WrapTek museum depth canvas stretcher bar kits provide a 1¼" deep profile. All stretcher bar kits come with stretcher bar frames, corner braces, corner clips, screws and a wall hanging kit. Everything you need for a successful canvas stretching experience. All stretcher bars are made from kiln dried North American Poplar hardwood. 1 Kit in each box.
Learn More
* = Kit includes required center brace
**= Kit includes required 45 degree backbraces
23 Item(s)
