Search results for '30'X45" - WRAPTEK 1 3/4" DEEP STRETCHER BAR KIT'

These back braces are intended for use with stretcher bar kits over 30"-34” on the long side. Order the same length as the 'short' side of your stretcher bar kit(s).

For most applications only one back brace required per stretcher bar kit . For longer, panorama style frames, two or more back braces may be required.

For stretcher bar kits with both dimensions exceeding 30", see our 45 Degree Back Braces.

Note: It is not necessary to order backbraces when ordering a pre-configured kit.

Note that Medium Duty braces are longer than Standard braces and are not interchangable.

Canvas Roll Straps

- Keep your rolls of media neat and organized.

- Fits up to 8" diameter media.

- Hook and Loop straps are 2" wide and 23" long.

• STRETCH UP TO 200"+ With These XTRA Heavy Duty Bars!!
• These stretcher bars are 2-1/4” inch deep to the wall, 1⅜” wide and up to 200” long.
• Designed to support the largest gallery wraps
• Made from kiln dried North American Poplar hardwood.
• Sold in "2 Paks"
• Wraptek Solid Wood Stretcher Bars Are Made 100% in the USA.
• 2 Grooves to accept double bracing
• Splice kits included with bars over 100"

These back braces are intended for use with stretcher bar kits over 30"-34” on the long side. Order the same length as the 'short' side of your stretcher bar kit(s).

For most applications only one back brace required per stretcher bar kit . For longer, panorama style frames, two or more back braces may be required.

For stretcher bar kits with both dimensions exceeding 30", see our 45 Degree Back Braces.

Note: It is not necessary to order backbraces when ordering a pre-configured kit.

How to order the correct size: Multiply the short side of your frame by 0.6. Example (40"x60") 40x0.6=24", if your math results in a decimal point round up or down to the nearest inch.

45º Back Braces - 1¾” wide - 4 braces - 45 degree back braces are used in a “diamond configuration” to support the sides of the stretcher bars. If you purchase 45 degree braces, you will not usually need a center back brace unless the stretched canvas is over 60” and the short side of the canvas is less than 38”.