Search results for 'what size back brace'
-
Hanging Kit
$1.48Includes 2 frame D-Ring for the back of the canvas, 1 wall bracket w/nail, and 72” of braided wire. Learn More -
Layout Ruler - 2" Wide X 48" Long
$11.50Out of stock
Our 2 inch wide by 48 inch long ruler was custom made to use with our stretch bars to make positioning stretcher bars easy. This ruler is exactly what you need to complete a successful stretch. Learn More -
Museum Depth Kits- 1-1/4" Deep x 1-3/8" wide, Up to 36"x40"
Starting at: $27.52
Our WrapTek museum depth canvas stretcher bar kits provide a 1¼" deep profile. All stretcher bar kits come with stretcher bar frames, corner braces, corner clips, screws and a wall hanging kit. Everything you need for a successful canvas stretching experience. All stretcher bars are made from kiln dried North American Poplar hardwood. 1 Kit in each box.
Learn More
* = Kit includes required center brace
**= Kit includes required 45 degree backbraces -
Standard Duty Kits- 1-1/2" Deep x 1-3/8" wide, Up to 40"x60"
Starting at: $30.38
Our WrapTek standard duty stretcher bar kits provide a 1½" deep profile. All kits come with stretcher bars, corner braces, corner clips, screws and a wall hanging kit. Everything you need for a successful canvas stretching experience. All stretcher bars are made from kiln dried North American Poplar hardwood. 1 Kit in each box.
* = Kit includes required center brace
Learn More
**= Kit includes required 45 degree backbraces -
Standard Back Brace - 1¾” wide - 1 center brace, *Not for use with medium duty bars
Starting at: $2.52
These back braces are intended for use with stretcher bar kits over 30"-34” on the long side. Order the same length as the 'short' side of your stretcher bar kit(s).
For most applications only one back brace required per stretcher bar kit . For longer, panorama style frames, two or more back braces may be required.
For stretcher bar kits with both dimensions exceeding 30", see our 45 Degree Back Braces.Note: It is not necessary to order backbraces when ordering a pre-configured kit.
Learn More -
45º Back Braces - 1¾” wide - 4 braces
Starting at: $11.74
How to order the correct size: Multiply the short side of your frame by 0.6. Example (40"x60") 40x0.6=24", if your math results in a decimal point round up or down to the nearest inch.
45º Back Braces - 1¾” wide - 4 braces - 45 degree back braces are used in a “diamond configuration” to support the sides of the stretcher bars. If you purchase 45 degree braces, you will not usually need a center back brace unless the stretched canvas is over 60” and the short side of the canvas is less than 38”.
Learn More -
Heavy Duty Kits- 1-3/4" Deep x 1-3/8" wide, up to 40"x60"
Starting at: $36.05
KITS AVAILABLE UP TO 40"X60"!Our Heavy Duty stretcher bar kits provide a 1¾" deep profile. All kits come with stretcher bars, corner braces, corner clips, screws and a wall hanging kit. Everything you need for a successful canvas stretching experience. All stretcher bars are made from kiln dried North American Poplar hardwood. 1 Kit in each box.
Learn More -
Museum Depth Stretcher Bars- 1-1/4" Depth, Up to 72"- 2 Bar Pack
Starting at: $6.44
- STRETCH UP TO 72" WITH THESE BARS!
- These stretcher bars are 1¼” deep to the wall, 1⅜” wide and up to 72” long.
- Designed to support gallery wraps
- Made from kiln dried North American Poplar hardwood.
- Stretcher Bars over 54” WILL incur a special shipping charge from UPS.
- Sold in "2 Paks"
- WrapTek Solid Wood Stretcher Bars Are Made 100% in the USA.
-
Standard Duty Stretcher Bars- 1-1/2" Depth, Up to 90"- 2 Bar Pack
Starting at: $6.44
- STRETCH UP TO 90" WITH OUR MOST POPULAR STYLE BARS!
- These stretcher bars are 1½” deep to the wall, 1⅜” wide and up to 90” long.
- Designed to support gallery wraps
- Made from kiln dried North American Poplar hardwood.
- Stretcher Bars over 54” WILL incur a special shipping charge from UPS.
- Sold in "2 Paks"
- WrapTek Solid Wood Stretcher Bars Are Made 100% in the USA.
-
Heavy Duty Stretcher Bars- 1-3/4" Depth, Up to 100"- 2 Bar Pack
Starting at: $7.36
- STRETCH UP TO 100" WITH THESE HEAVY DUTY BARS!!
- These stretcher bars are 1¾” inch deep to the wall, 1⅜” wide and up to 100” long.
- Designed to support gallery wraps
- Made from kiln dried North American Poplar hardwood.
- Sold in "2 Paks"
- WrapTek Solid Wood Stretcher Bars Are Made 100% in the USA.
-
Heavy Duty Stretcher Bars- 1-3/4" Depth, Up to 100"- 8 Bar Pack
Starting at: $27.23
- STRETCH UP TO 100" WITH OUR HEAVY DUTY BARS!
- These stretcher bars are 1¾” deep to the wall, 1⅜” wide and up to 100” long.
- Designed to support gallery wraps
- Made from kiln dried North American Poplar hardwood.
- Stretcher Bars over 54” WILL incur a special shipping charge from UPS.
- Sold in "8 Paks"
- WrapTek Solid Wood Stretcher Bars Are Made 100% in the USA.
-
Standard Duty Stretcher Bars- 1-1/2" Depth, Up to 90"- 8 Bar Pack
Starting at: $23.55
- STRETCH UP TO 90" WITH OUR MOST POPULAR STYLE BARS!
- These stretcher bars are 1½” deep to the wall, 1⅜” wide and up to 90” long.
- Designed to support gallery wraps
- Made from kiln dried North American Poplar hardwood.
- Stretcher Bars over 54” WILL incur a special shipping charge from UPS.
- Sold in "8 Paks"
- WrapTek Solid Wood Stretcher Bars Are Made 100% in the USA.
-
Museum Depth Stretcher Bars - 1-1/4" Depth, Up to 72"- 8 Bar Pack
Starting at: $23.55
- STRETCH UP TO 72" WITH THESE LOW PROFILE BARS!
- These stretcher bars are 1¼” deep to the wall, 1⅜” wide and up to 72” long.
- Designed to support gallery wraps
- Made from kiln dried North American Poplar hardwood.
- Stretcher Bars over 54” WILL incur a special shipping charge from UPS.
- Sold in "8 Paks"
- WrapTek Solid Wood Stretcher Bars Are Made 100% in the USA.
-
Medium Duty Kits- 1-1/2" Depth x 1" Wide, Up to 40"x60"
Starting at: $24.88
Our most economical way to stretch up to 60" prints!
Our WrapTek medium duty canvas stretcher frames provide a 1½" deep profile. All canvas frame kit come with stretcher bars, corner braces, corner clips, screws and a wall hanging kit. Everything you need for a successful canvas stretching experience. All stretcher bars are made from kiln dried North American Poplar hardwood. 1 Kit in each box.
* = Kit includes required center brace
Learn More
**= Kit includes required 45 degree backbraces -
Medium Duty Stretcher Bars- 1-1/2" Depth, Up to 60"- 2 Bar Pack
Starting at: $6.07
- OUR MOST ECONOMICAL WAY TO STRETCH UP TO 60" PRINTS!
- These stretcher bars are 1-1/2” deep to the wall, 1” wide and up to 60” long.
- Designed to support gallery wraps
- Made from kiln dried North American Poplar hardwood.
- Sold in "2 Paks"
- WrapTek Solid Wood Stretcher Bars Are Made 100% in the USA.
-
Medium Duty Stretcher Bars - 1-1/2" Depth, Up to 60"- 8 Bar Pack
Starting at: $21.86
- OUR MOST ECONOMICAL WAY TO STRETCH UP TO 60" PRINTS!
- These stretcher bars are 1-1/2” deep to the wall, 1” wide and up to 60” long.
- Designed to support gallery wraps
- Made from kiln dried North American Poplar hardwood.
- Sold in "8 Paks"
- WrapTek Solid Wood Stretcher Bars Are Made 100% in the USA.
-
Medium Duty Strecter Bars- 1-1/2" Depth, Up to 60"- 24 Bar Case
Starting at: $55.86
- OUR MOST ECONOMICAL WAY TO STRETCH UP TO 48" PRINTS!
- These stretcher bars are 1-1/2” deep to the wall, 1” wide and up to 48” long.
- Designed to support gallery wraps
- Made from kiln dried North American Poplar hardwood.
- Sold in "24 Bar Cases"
- WrapTek Stretcher Bars are Made 100% in the USA.
-
Splice Kit- For bars over 100"
$28.75Splice Kit for Bars over 100"- Order 2-2paks of bars half the length of the overall size that exceeds 100" and this "Splice Kit" to create your 100"+ sizes. Learn More -
Heavy Duty Hanging Kit
$2.88Includes 2 heavy duty frame hangers for the back of the canvas, 2 wall brackets w/nails, and over 100” of braided wire. Learn More -
Corner Braces- 4 Pack
$2.29Our standard corner braces, supplied 1 per bar ordered. In case you misplaced your corners you can buy more here for $1.99 for a set of 4 corners. 4 Corner braces are enough to stretch one print onto a set of our Wraptek stretcher bars. Buy 4 sets and save 20% Learn More -
Medium Duty Back Brace - 1¾” wide - 1 center brace, *For use with medium duty bars ONLY
Starting at: $2.52
These back braces are intended for use with stretcher bar kits over 30"-34” on the long side. Order the same length as the 'short' side of your stretcher bar kit(s).
For most applications only one back brace required per stretcher bar kit . For longer, panorama style frames, two or more back braces may be required.
For stretcher bar kits with both dimensions exceeding 30", see our 45 Degree Back Braces.Note: It is not necessary to order backbraces when ordering a pre-configured kit.
Note that Medium Duty braces are longer than Standard braces and are not interchangable.
Learn More -
SOLCAN by Que Media- Magnate Solvent - Proffesional Gallery Wrap Matte Canvas
Starting at: $126.49
Solvent, Eco Solvent, Latex, UV, 21mil, 65' Rolls
Benefits:
- Gallery Frame Wrap
- Crack Free Stretching when Laminated
- Full Color Gamut Representation with Vivid Color Locking
- Smooth Matte Finish
- Water Resistant
- 24", 36", 54" & 60" rollsApplications:
- Great for Indoor Gallery Wrap
- Backdrops & Signage
- Photo ReproductionAqueous Media Application Guide
Learn More -
PFS By Que Media- Motif Aqueous- Super Heavy Matte Coated Fabric
Starting at: $120.00
Aqueos, Latex, UV, 13mil, 100' Rolls
Benefits:
- Water Resistant
- 600 x 600 Denier
- Scratch Resistant
- Ultra Strong
- RecyclableApplications:
- Roll-up Banners
- Hanging Banners or Wall Drape
- Theater Backdrops
- Faux CanvasAqueous Media Application Guide
Learn More -
XHD Stretcher Bars- 2-1/4" Depth, Up to 200"- 2 Pak
Starting at: $21.01
- STRETCH UP TO 200"+ With These XTRA Heavy Duty Bars!!
- These stretcher bars are 2-1/4” inch deep to the wall, 1⅜” wide and up to 200” long.
- Designed to support the largest gallery wraps
- Made from kiln dried North American Poplar hardwood.
- Sold in "2 Paks"
- Wraptek Solid Wood Stretcher Bars Are Made 100% in the USA.
- 2 Grooves to accept double bracing
- Splice kits included with bars over 100"
-
XHD Back Brace - 1¾” wide - 1 center brace, *For use with XHD bars only
Starting at: $11.28
These back braces are intended for use with stretcher bar kits over 30"-34” on the long side. Order the same length as the 'short' side of your stretcher bar kit(s).
For most applications only one back brace required per stretcher bar kit . For longer, panorama style frames, two or more back braces may be required.
For stretcher bar kits with both dimensions exceeding 30", see our 45 Degree Back Braces.Note: It is not necessary to order backbraces when ordering a pre-configured kit.
Learn More